Product Details
EN EN-6 3. Operation ■ About the operation method, refer to the operation manual that comes with each remote controller. 3.1. Turning ON/OFF [ON] [OFF] Press the [ON/OFF] button. The ON/OFF lamp will light up in green, and the operation will start. Press the [ON/OFF] button again. The ON/OFF lamp will come off, and the operation will stop. ■ Operation status memory Remote controller setting Operation mode Operation mode before the power was turned off Preset temperature Preset temperature before the power was turned off Fan speed Fan speed before the power was turned off ■ Settable preset temperature range Operation mode Preset temperature range Cool/Dry 19 ~ 30 ºC Heat 17 ~ 28 ºC Auto 19 ~ 28 ºC Fan/Ventilation Not settable Note: Even if you press the ON/OFF button immediately after shutting down the operation is progress, the air conditioner will not start for about 3 minutes. This is to prevent the internal components from being damaged. 3.2. Mode Selection Press the [F1] button to go through the op- eration modes in the order of “Cool”, “Dry”, “Fan”, “Auto”, and “Heat”. Select the desired operation mode. Cool Dry Fan Auto Heat • Operation modes that are not available to the connected outdoor unit models will not appear on the display. What the blinking mode icon means The mode icon will blink when other indoor units in the same refrigerant system (connected to the same outdoor unit) are already operated in a different mode. In this case, the rest of the unit in the same group can only be operated in the same mode. Automatic operation ■ According to a set temperature, cooling operation starts if the room tem- perature is too hot and heating operation starts if the room temperature is too cold. ■ During automatic operation, if the room temperature changes and remains 2.0 °C or more above the set temperature for 15 minutes, the air condi- tioner switches to cool mode. In the same way, if the room temperature remains 2.0 °C or more below the set temperature for 15 minutes, the air conditioner switches to heat mode. Cool mode 15 minutes (switches from heating to cooling) Set temperature +2.0°C Set temperature Set temperature -2.0°C 15 minutes (switches from cooling to heating) F1 F2 F3 F4 Cool Room AutoSet temp. Mode Temp. Fan Fri Note: • This function cannot be set depending on the outdoor unit to be connected. When the operation mode is set to the Auto (dual set point) mode, two preset temperatures (one each for cooling and heating) can be set. De- pending on the room temperature, indoor unit will automatically operate in either the Cool or Heat mode and keep the room temperature within the preset range. For details on how to operate, refer to manual of remote controller. Information for multi system air conditioner (Outdoor unit: MXZ series) ■ Multi system air conditioner (Outdoor unit: MXZ series) can connect two or more indoor units with one outdoor unit. According to the capacity, 2 or more units can operate simultaneously. • When you try to operate 2 or more indoor units with 1 outdoor unit simultaneously, one for the cooling and the other for heating, the operation mode of the indoor unit that operates earlier is selected. The other indoor units that will start the operation later cannot operate, indicating an operation state in blinking. In this case, please set all the indoor units to the same operation mode. • There might be a case that the indoor unit, which is operating in “Auto” mode. Cannot change over to the operating mode “Cool”/“Heat” and becomes a state of standby. • When indoor unit starts the operation while the defrosting of outdoor unit is being done, it takes a few minutes (max. about 15 minutes) to blow out the warm air. • In the heating operation, though indoor unit that does not operate may get warm or the sound of refrigerant flowing may be heard, they are not malfunction. The reason is that the refrigerant continuously flows into it. RG79F159W01_01En.indd 6 2018/04/16 11:08:55
Specifications
- Brand: MITSUBISHI
- Model: PRC-500MEA
- Color: White, Green
- Manufacturer: MITSUBISHI